AC source power & DC source power manufacturing factory
Linear Intelligent DC Power Source APD2000L Series

Linear Intelligent DC Power Source APD2000L Series

Product parameter
• Input voltage range:1Ø2W+G 110V/220V±10% 220V±10% 3Ø4W+G 220V/380V±10%
• Constant voltage temperature coefficient:50~100ppm/℃ 
Constant current temperature coefficient:300ppm/℃
• CV(Constant Voltage)Mode
line regulation≦0.05%Vmax+3mV load regulation≦0.05%Vmax+5mV 
Ripple&Noise≦10mVrms(≦600V)/ 20mVrms(≦1000V)
• CC(Constant current)Mode
line regulation≦0.05%Vmax+3mV load regulation≦0.05%Vmax+5mV
Ripple&Noise≦6mArms(≦20A))/ 25mArms(≦30A)/30mArms(≦60A)

Online quote

Product details

High Performance
• Modular structure, low failure rate and small design volume, industrial products, sufficient output capacity, high cost performance
• With voltage reverse protection and remote feedback as standard function
• With constant voltage and current mode, low ripple and noise, fast response, less than 100µs
• Resolution of Voltage 10mV and Current 1mA
• Current Limit Settings, Preview Function, Overvoltage Settings (OVP), Preview Function

Humanized design
• The panel is simple and easy to operate. The voltage on/off is a touch switch.
• Ultra-large 7-inch touch screen displays parameters: voltage, current, power and time
• Digital keyboard and knob adjust two ways to set voltage and current, current upper and lower limit setting function and alarm function
• RS232 or RS485 interface, Five groups of test groups can be set up on a single machine. Each group can set up 35 different test points (different voltage0~800V,current0~1000A, time 0.1S~999.9Hand can do (0~999999) cycle test.

Suitable place
Photovoltaic Inverter Testing,DC Motor Test,Life Testing of DC Products,Analogous UPS Converter Input Power Supply,LCD panel testing,Electric Vehicle/Charging Pile Test, Widely used in electromechanical,Communication maintenance,Laboratory,Graduate School,School Electronic Products Production Line and System Integration Embedded Automation and Other Industries.

Selection specification(APD2000L Series)

  0~30A 0~50A 0~100A 0~200A 0~400A 0~600A 0-1000A
0~20V 2020-30AL 2020-50AL 2020-100AL 2020-200AL 2020-400AL 2020-600AL 2020-1000AL
0~50V 2050-30AL 2050-50AL 2050-100AL 2050-200AL 2050-400AL 2050-600AL 2050-1000AL
0~100V 2100-30AL 2100-50AL 2100-100AL 2100-200AL 2100-400AL 2100-600AL 2100-1000AL
0~200V 2200-30AL 2200-50AL 2200-100AL 2200-200AL 2200-400AL 2200-600AL 2200-1000AL
0~300V 2300-30AL 2300-50AL 2300-100AL 2300-200AL 2300-400AL 2300-600AL 2300-1000AL
0~400V 2400-30AL 2400-50AL 2400-100AL 2400-200AL 2400-400AL 2400-600AL 2400-1000AL
0~500V 2500-30AL 2500-50AL 2500-100AL 2500-200AL 2500-400AL 2500-600AL 2500-1000AL
0~600V 2600-30AL 2600-50AL 2600-100AL 2600-200AL 2600-400AL 2600-600AL 2600-1000AL
Note appended:
1. Power calculation method:Voltage V × Current I =Power W
2. Customized minimum power of the power supply 500W
Welcome to special specifications
Online service
Service Hotline
86-769-89616802
86-13602353727

ADMIRE POWER